Adafruit Feather ESP32-S3
Feather-format ESP32-S3 with a Li-Po charger and STEMMA QT connector.
MicrocontrollerESP32-S3 240 MHz
Flash4 MB
RAM2 MB PSRAM
Logic level3.3 V
Development BoardsReviewedMPN 5477Used in 2 projects
In short
What is the Adafruit Feather ESP32-S3 and what is it used for?
Feather-format ESP32-S3 with a Li-Po charger and STEMMA QT connector. Makers use it for battery IoT with plug-in sensors.
How it works
An ESP32-S3 with 4 MB flash, 2 MB PSRAM, a LiPo charger and a fuel gauge in the Feather form factor.
Key specifications
| Development board spec | Value |
|---|---|
| Microcontroller | ESP32-S3 240 MHz |
| Flash | 4 MB |
| RAM | 2 MB PSRAM |
| Logic level | 3.3 V |
| Wireless | Wi-Fi, Bluetooth LE |
Pinout
STEMMA QTI2C connector (power switched by a pin)
JSTLiPo battery
NeoPixelRGB LED
SDA SCLI2C pins
BATBattery voltage
How to use it
Works with CircuitPython or Arduino. The MAX17048 fuel gauge reports battery percentage over I2C, and FeatherWings stack on top.
Applications
Battery IoT with plug-in sensors
Alternatives
- Adafruit Feather RP2040RP2040 Feather
- Seeed XIAO ESP32S3Smaller and cheaper
Common questions
What is the Adafruit Feather ESP32-S3 used for?
In maker projects: battery IoT with plug-in sensors.
How does the Adafruit Feather ESP32-S3 work?
An ESP32-S3 with 4 MB flash, 2 MB PSRAM, a LiPo charger and a fuel gauge in the Feather form factor.
What can I use instead of the Adafruit Feather ESP32-S3?
Adafruit Feather RP2040 and Seeed XIAO ESP32S3.
