Idea
In short
How do you build an ethernet sensor web page?
A wired network shield serves a tiny web page with live temperature and humidity on your home network only. Do not expose it to the internet. You need Arduino Uno R3, Arduino Ethernet Shield W5100 / W5500, DHT22 Sensor, Resistor 10 kΩ and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Serve a local web page.
Parts list
- Development Boards
- Wireless
- Sensors
- Passives
- Prototyping
How to build it
- Fit the shield
- Get an address
- Read the sensor
- Serve a simple page
- Refresh the page
Common questions
What parts do I need for the ethernet sensor web page?
Arduino Uno R3, Arduino Ethernet Shield W5100 / W5500, DHT22 Sensor, Resistor 10 kΩ and Breadboard 830 Tie Points.
How long does the ethernet sensor web page take to build?
About 270 minutes for a intermediate maker.
