Arduino Ethernet Shield W5100 / W5500
Ethernet and microSD on an Uno shield.
RadioWired Ethernet
InterfaceSPI on the ICSP header
Supply voltage5 V via the Uno
WirelessReviewedMPN Ethernet ShieldUsed in 1 project
In short
What is the Arduino Ethernet Shield W5100 / W5500 and what is it used for?
Ethernet and microSD on an Uno shield. Makers use it for uno web servers.
How it works
A WIZnet Ethernet controller and a microSD slot on an Uno shield.
Key specifications
| Wireless module spec | Value |
|---|---|
| Radio | Wired Ethernet |
| Interface | SPI on the ICSP header |
| Supply voltage | 5 V via the Uno |
Pinout
10Ethernet chip select
4SD card chip select
ICSPSPI
RJ45Network
How to use it
Use the Ethernet library. Pins 10 and 4 are taken, and SPI goes through the ICSP header so it also fits a Mega. Set the unused chip select high so the two SPI devices do not clash.
Applications
Uno web servers
Builds that use it
Alternatives
- W5500 Ethernet moduleSmaller module for any board
Common questions
What is the Arduino Ethernet Shield W5100 / W5500 used for?
In maker projects: uno web servers.
How does the Arduino Ethernet Shield W5100 / W5500 work?
A WIZnet Ethernet controller and a microSD slot on an Uno shield.
What voltage does the Arduino Ethernet Shield W5100 / W5500 need?
5 V via the Uno.
How do I connect the Arduino Ethernet Shield W5100 / W5500 to an Arduino or ESP32?
SPI on the ICSP header. Pins: 10 (Ethernet chip select), 4 (SD card chip select), ICSP (SPI), RJ45 (Network).
What can I use instead of the Arduino Ethernet Shield W5100 / W5500?
W5500 Ethernet module.
