Idea
In short
How do you build a capacitor ESR checker?
Measure a capacitor's equivalent series resistance in circuit with a small AC signal, to find dried-out caps. You need Arduino Nano, LM358 Op-Amp, Resistor 10 Ω, Resistor 100 Ω, Electrolytic capacitor 10 µF and SSD1306 OLED Display.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Understand ESR and measure it with an AC method.
Parts list
- Development Boards
- Integrated Circuits
- Passives
- Passives
- Passives
- Displays
How to build it
- Drive a 100 kHz square wave through a small resistor
- Measure the AC voltage across the capacitor
- Work out ESR
- Compare good and bad capacitors
- Discharge capacitors before testing
Common questions
What parts do I need for the capacitor ESR checker?
Arduino Nano, LM358 Op-Amp, Resistor 10 Ω, Resistor 100 Ω, Electrolytic capacitor 10 µF and SSD1306 OLED Display.
How long does the capacitor ESR checker take to build?
About 180 minutes for a intermediate maker.
