Projects / Ideas / Egg drop impact logger

Egg drop impact logger

IntermediateGames & ToysIdeaReviewed
In short

How do you build an egg drop impact logger?

A small motion sensor rides in a protective box dropped from a safe height onto a soft mat, and the Nano records the peak force in g that the box felt, so you can compare different padding. A fun way to test packaging. Drop only from a low, safe height and keep clear below. You need Arduino Nano, MPU6050 IMU, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 100 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure the peak impact of a dropped box.

How to build it

  1. Read the sensor very quickly
  2. Find the largest value after the drop
  3. Hold the peak on the screen
  4. Compare different padding
  5. Note the drop height each time

Related projects

Common questions

What parts do I need for the egg drop impact logger?

Arduino Nano, MPU6050 IMU, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the egg drop impact logger take to build?

About 100 minutes for a intermediate maker.