Idea
In short
How do you build an arcade stick to the serial monitor?
An eight-way arcade stick and four buttons are read and shown on the serial monitor and a small game. You need Arduino Nano, Joystick arcade (8-way), Tactile push button 6 mm × 4, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read an arcade stick.
Parts list
- Development Boards
- Switches
- Switches
- Displays
- Prototyping
How to build it
- Wire the four direction switches
- Wire the buttons
- Read all the inputs
- Debounce them
- Move a dot on the display
Related projects
Common questions
What parts do I need for the arcade stick to the serial monitor?
Arduino Nano, Joystick arcade (8-way), Tactile push button 6 mm × 4, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the arcade stick to the serial monitor take to build?
About 120 minutes for a beginner maker.
