Idea
In short
How do you build an ESP32-S3 pulse and oxygen demo?
An ESP32-S3 reads a MAX30102 optical sensor on a fingertip and shows a pulse rate and a rough oxygen estimate on an OLED. A hobby demo only, not a medical device: the numbers must never be used to make health decisions. You need ESP32-S3 DevKitC-1, MAX30102 pulse oximeter and heart rate sensor, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 210 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See how an optical pulse sensor works.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
How to build it
- Wire the sensor and display on I2C
- Read the red and infrared values
- Find the beat peaks
- Estimate the pulse rate
- Show an indicative oxygen figure with a disclaimer
Common questions
What parts do I need for the ESP32-S3 pulse and oxygen demo?
ESP32-S3 DevKitC-1, MAX30102 pulse oximeter and heart rate sensor, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the ESP32-S3 pulse and oxygen demo take to build?
About 210 minutes for a advanced maker.
