Projects / Ideas / Heartbeat light demo

Heartbeat light demo

IntermediateHealthIdeaReviewed
In short

How do you build a heartbeat light demo?

A pulse sensor blinks an LED with each beat and shows an estimated beats per minute. A learning demo, not a medical device. You need Arduino Nano, MAX30102 pulse oximeter and heart rate sensor, LED 5 mm red, Resistor 220 Ω, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Detect a pulse with light.

How to build it

  1. Wire the sensor on I2C
  2. Read the infrared signal
  3. Find peaks
  4. Blink on each peak
  5. Show beats per minute

Related projects

Common questions

What parts do I need for the heartbeat light demo?

Arduino Nano, MAX30102 pulse oximeter and heart rate sensor, LED 5 mm red, Resistor 220 Ω, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the heartbeat light demo take to build?

About 270 minutes for a intermediate maker.