Idea
In short
How do you build a compost heat capture study?
Measure how much heat a compost pile produces with probes and a water loop. You need ESP32 DevKit V1, DS18B20 waterproof probe × 3, Water flow sensor YF-S201, Mini submersible water pump (3 to 6 V), MicroSD Card Module and SanDisk microSD card 32 GB (A1, Class 10).
- Level
- Advanced
- Time
- About 480 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure heat flow.
Parts list
- Development Boards
- Sensors
- Sensors
- Motors & Actuators
- Interfaces
- SBC Accessories
How to build it
- Place probes in the pile
- Circulate water through a coil
- Measure in and out
- Work out watts
- Plot over weeks
Common questions
What parts do I need for the compost heat capture study?
ESP32 DevKit V1, DS18B20 waterproof probe × 3, Water flow sensor YF-S201, Mini submersible water pump (3 to 6 V), MicroSD Card Module and SanDisk microSD card 32 GB (A1, Class 10).
How long does the compost heat capture study take to build?
About 480 minutes for a advanced maker.
