Idea
In short
How do you build an ESP32 battery-friendly weather node?
An ESP32 wakes every ten minutes, reads a DHT22, shows the values on an OLED for a few seconds and goes back to deep sleep, keeping the last ten readings in sleep-proof memory. You need ESP32 DevKit V1, DHT22 Sensor, Resistor 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Save power by sleeping between readings.
Parts list
- Development Boards
- Sensors
- Passives
- Displays
- Prototyping
How to build it
- Wake on a timer
- Read the sensor
- Store the reading in RTC memory
- Show the last values for five seconds
- Return to deep sleep
Common questions
What parts do I need for the ESP32 battery-friendly weather node?
ESP32 DevKit V1, DHT22 Sensor, Resistor 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the ESP32 battery-friendly weather node take to build?
About 150 minutes for a intermediate maker.
