Projects / Ideas / UDP temperature broadcaster

UDP temperature broadcaster

IntermediateIoTIdeaReviewed
In short

How do you build an UDP temperature broadcaster?

An ENC28J60 module sends temperature as UDP packets to your network every few seconds, with no server needed. You need Arduino Nano, ENC28J60 Ethernet module, DS18B20 waterproof probe and Resistor 4.7 kΩ.

Level
Intermediate
Time
About 120 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Send UDP packets from a small microcontroller.

Parts list

How to build it

  1. Wire the Ethernet module
  2. Read the temperature
  3. Build a UDP packet
  4. Send it to the broadcast address
  5. Listen with a script on a computer

Related projects

Common questions

What parts do I need for the UDP temperature broadcaster?

Arduino Nano, ENC28J60 Ethernet module, DS18B20 waterproof probe and Resistor 4.7 kΩ.

How long does the UDP temperature broadcaster take to build?

About 120 minutes for a intermediate maker.