Idea
In short
How do you build an ESP32 Bluetooth Low Energy temperature beacon?
An ESP32 reads a DS18B20 and advertises the value over Bluetooth Low Energy so a phone app can read it without any Wi-Fi. You need ESP32 DevKit V1, DS18B20 waterproof probe, Resistor 4.7 kΩ and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 170 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Share a sensor reading over BLE.
Parts list
- Development Boards
- Sensors
- Passives
- Prototyping
How to build it
- Read the probe
- Create a BLE service and a characteristic
- Update the value each few seconds
- Read it from a phone app
- Add a notification on change
Common questions
What parts do I need for the ESP32 Bluetooth Low Energy temperature beacon?
ESP32 DevKit V1, DS18B20 waterproof probe, Resistor 4.7 kΩ and Breadboard 830 Tie Points.
How long does the ESP32 Bluetooth Low Energy temperature beacon take to build?
About 170 minutes for a intermediate maker.
