Idea
In short
How do you build a muscle-controlled gripper?
An EMG sensor on your forearm reads muscle signals and opens or closes a servo gripper. You need Arduino Nano, EMG muscle sensor (MyoWare 2.0), MG996R metal gear servo, 5 V 2 A USB adapter and Electrolytic capacitor 1000 µF.
- Level
- Advanced
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read a biosignal and turn it into control.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Power
- Passives
How to build it
- Place the electrodes on the forearm
- Read the smoothed EMG output
- Set open and close thresholds
- Move the servo proportionally
- Never connect electrodes to mains-powered gear
Common questions
What parts do I need for the muscle-controlled gripper?
Arduino Nano, EMG muscle sensor (MyoWare 2.0), MG996R metal gear servo, 5 V 2 A USB adapter and Electrolytic capacitor 1000 µF.
How long does the muscle-controlled gripper take to build?
About 240 minutes for a advanced maker.
