Idea
In short
How do you build a single braille cell display?
Six small solenoids or servos raise pins to show braille letters from text sent over serial. You need Arduino Nano, SG90 Micro Servo × 6, PCA9685 16-channel servo driver and 5 V 2 A USB adapter.
- Level
- Advanced
- Time
- About 480 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Drive small actuators to make tactile output.
Parts list
- Development Boards
- Motors & ActuatorsSG90 Micro Servo × 6
- Motor Drivers
- Power
How to build it
- Map each letter to six dots
- Raise pins with servo arms
- Show one letter at a time
- Step through text with a button
- Tune pin height for touch
Common questions
What parts do I need for the single braille cell display?
Arduino Nano, SG90 Micro Servo × 6, PCA9685 16-channel servo driver and 5 V 2 A USB adapter.
How long does the single braille cell display take to build?
About 480 minutes for a advanced maker.
