Components / Sensors / EMG muscle sensor (MyoWare 2.0)

EMG muscle sensor (MyoWare 2.0)

Measures muscle activity through skin electrodes.

MeasuresMuscle electrical activity
InterfaceAnalog envelope
Supply voltage3.3 to 5 V
Watch out forBattery power only for safety
SensorsReviewedMPN MyoWare 2.0Used in 3 projects
EMG
In short

What is the EMG muscle sensor (MyoWare 2.0) and what is it used for?

Measures muscle activity through skin electrodes. Makers use it for prosthetics demos, game control.

How it works

Electrodes pick up the small voltages muscle fibres make when they contract; the board amplifies and smooths them.

Key specifications

Sensor specValue
MeasuresMuscle electrical activity
InterfaceAnalog envelope
Supply voltage3.3 to 5 V
Watch out forBattery power only for safety

Pinout

+3.3 to 5 V
−Ground
ENVRectified muscle activity envelope
RAWRaw signal on some boards

How to use it

Place the sensor along the muscle with the reference electrode on a bony area. Run from a battery for safety. The ENV output can control a servo or game directly.

Applications

Alternatives

Common questions

What is the EMG muscle sensor (MyoWare 2.0) used for?

In maker projects: prosthetics demos, game control.

How does the EMG muscle sensor (MyoWare 2.0) work?

Electrodes pick up the small voltages muscle fibres make when they contract; the board amplifies and smooths them.

What voltage does the EMG muscle sensor (MyoWare 2.0) need?

3.3 to 5 V.

How do I connect the EMG muscle sensor (MyoWare 2.0) to an Arduino or ESP32?

Analog envelope. Pins: + (3.3 to 5 V), − (Ground), ENV (Rectified muscle activity envelope), RAW (Raw signal on some boards).

What can I use instead of the EMG muscle sensor (MyoWare 2.0)?

Heart rate and ECG sensor AD8232.