Projects / Ideas / Electronic dice with a 7-segment display

Electronic dice with a 7-segment display

BeginnerGames & ToysIdeaReviewed
In short

How do you build an electronic dice with a 7-segment display?

Press a button and a 7-segment digit rolls and settles on a number from 1 to 6. You need Arduino Uno R3, CD4511 BCD to 7-segment decoder, Tactile push button 6 mm, Resistor 330 Ω × 7, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Beginner
Time
About 80 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Drive a decoder with a random number.

How to build it

  1. Wire the BCD decoder to four Arduino pins
  2. Show digits 0 to 9 to test
  3. Roll random numbers quickly on button press
  4. Slow the roll down to a stop
  5. Add a roll counter on the serial monitor

Related projects

Common questions

What parts do I need for the electronic dice with a 7-segment display?

Arduino Uno R3, CD4511 BCD to 7-segment decoder, Tactile push button 6 mm, Resistor 330 Ω × 7, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the electronic dice with a 7-segment display take to build?

About 80 minutes for a beginner maker.