Idea
In short
How do you build a loRa serial cable replacement?
Two E32 UART LoRa modules replace a long serial cable between a sensor and a computer. You need Arduino Nano × 2, E32 LoRa UART module (868 MHz) × 2, USB to TTL adapter (CH340G) and Potentiometer 10 kΩ.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a LoRa module that behaves like a serial port.
Parts list
- Development BoardsArduino Nano × 2
- Wireless
- Interfaces
- Passives
How to build it
- Set the address and channel with the config pins
- Send readings
- Receive on a PC
- Test the range
- Add error detection to each line
Common questions
What parts do I need for the loRa serial cable replacement?
Arduino Nano × 2, E32 LoRa UART module (868 MHz) × 2, USB to TTL adapter (CH340G) and Potentiometer 10 kΩ.
How long does the loRa serial cable replacement take to build?
About 150 minutes for a intermediate maker.
