Components / Wireless / E32 LoRa UART module (868 MHz)

E32 LoRa UART module (868 MHz)

LoRa module with a serial interface, so no LoRa library is needed.

RadioLoRa
Band868 MHz
Typical rangeUp to about 3 km
InterfaceUART
WirelessReviewedMPN E32-868T20DUsed in 2 projects
E32
In short

What is the E32 LoRa UART module (868 MHz) and what is it used for?

LoRa module with a serial interface, so no LoRa library is needed. Makers use it for simple long-range serial links.

How it works

An Ebyte module with an SX1276 radio and a microcontroller that turns LoRa into a simple serial link.

Key specifications

Wireless module specValue
RadioLoRa
Band868 MHz
Typical rangeUp to about 3 km
InterfaceUART
Supply voltage2.3 to 5.2 V

Pinout

M0 M1Mode select (both low = normal, both high = sleep and config)
RXD TXDSerial
AUXBusy indicator
VCC2.3 to 5.2 V
GNDGround

How to use it

Two modules with the same address and channel talk transparently over serial at 9600 baud. Set the channel inside 865 to 867 MHz with the config mode or the EByte LoRa E32 library. No LoRa knowledge is needed.

Applications

Alternatives

Buy at

Common questions

What is the E32 LoRa UART module (868 MHz) used for?

In maker projects: simple long-range serial links.

How does the E32 LoRa UART module (868 MHz) work?

An Ebyte module with an SX1276 radio and a microcontroller that turns LoRa into a simple serial link.

What voltage does the E32 LoRa UART module (868 MHz) need?

2.3 to 5.2 V.

How do I connect the E32 LoRa UART module (868 MHz) to an Arduino or ESP32?

UART. Pins: M0 M1 (Mode select (both low = normal, both high = sleep and config)), RXD TXD (Serial), AUX (Busy indicator), VCC (2.3 to 5.2 V), GND (Ground).

What can I use instead of the E32 LoRa UART module (868 MHz)?

RFM95W LoRa module (868 MHz) and HC-05 Bluetooth Module.