Idea
In short
How do you build a serial cable replacement over radio?
A radio module pair carries serial data between two boards across a garden, checking local rules first. You need Arduino Nano × 2, E32 LoRa UART module (868 MHz) × 2 and Breadboard 830 Tie Points × 2.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a transparent serial radio link.
Parts list
- Development BoardsArduino Nano × 2
- Wireless
- Prototyping
How to build it
- Check local radio limits
- Set the same channel on both
- Send text
- Add framing and a checksum
- Measure the range
Common questions
What parts do I need for the serial cable replacement over radio?
Arduino Nano × 2, E32 LoRa UART module (868 MHz) × 2 and Breadboard 830 Tie Points × 2.
How long does the serial cable replacement over radio take to build?
About 270 minutes for a intermediate maker.
