Idea
In short
How do you build a counter with a built-in decoder?
A single counter chip counts button presses and drives a seven-segment display directly. You need CD4026 decade counter with 7-segment output, 7-segment display 1 digit (common cathode), Tactile push button 6 mm, Resistor 10 kΩ, Resistor 330 Ω × 7 and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count and display with one chip.
Parts list
- Integrated Circuits
- Displays
- Switches
- Passives
- PassivesResistor 330 Ω × 7
- Prototyping
How to build it
- Wire the display segments
- Add a debounced clock button
- Count 0 to 9
- Use the carry output
- Reset with a button
Common questions
What parts do I need for the counter with a built-in decoder?
CD4026 decade counter with 7-segment output, 7-segment display 1 digit (common cathode), Tactile push button 6 mm, Resistor 10 kΩ, Resistor 330 Ω × 7 and Breadboard 830 Tie Points.
How long does the counter with a built-in decoder take to build?
About 150 minutes for a beginner maker.
