Projects / Ideas / Two-digit counter with display

Two-digit counter with display

IntermediateDigital LogicIdeaReviewed
In short

How do you build a two-digit counter with display?

Two CD4026 counters drive two 7-segment displays to count events from 00 to 99. You need CD4026 decade counter with 7-segment output × 2, 7-segment display 1 digit (common cathode) × 2, Resistor 330 Ω × 14, NE555 Timer IC, Resistor 10 kΩ × 2, Electrolytic capacitor 10 µF, Tactile push button 6 mm, Breadboard 830 Tie Points, Jumper wires male to male (40 pcs, 20 cm), 9 V battery and 9 V battery snap with DC jack.

Level
Intermediate
Time
About 120 min
Parts
11
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Cascade counters with carry out.

How to build it

  1. Clock the first counter from a 555 or a sensor
  2. Feed its carry into the second
  3. Wire each display through resistors
  4. Reset both with a button
  5. Count people through a door

Related projects

Common questions

What parts do I need for the two-digit counter with display?

CD4026 decade counter with 7-segment output × 2, 7-segment display 1 digit (common cathode) × 2, Resistor 330 Ω × 14, NE555 Timer IC, Resistor 10 kΩ × 2, Electrolytic capacitor 10 µF, Tactile push button 6 mm, Breadboard 830 Tie Points, Jumper wires male to male (40 pcs, 20 cm), 9 V battery and 9 V battery snap with DC jack.

How long does the two-digit counter with display take to build?

About 120 minutes for a intermediate maker.