Idea
In short
How do you build a single-digit counter with a display?
A decade counter with a built-in decoder drives a seven-segment digit directly, counting button presses from zero to nine. You need CD4026 decade counter with 7-segment output, Tactile push button 6 mm, Resistor 10 kΩ, Resistor 330 Ω × 7, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count and display with one chip.
Parts list
- Integrated Circuits
- Switches
- Passives
- PassivesResistor 330 Ω × 7
- Prototyping
- Prototyping
How to build it
- Wire power and the display
- Add the clock button
- Add a debounce capacitor
- Add reset
- Chain a second digit
Common questions
What parts do I need for the single-digit counter with a display?
CD4026 decade counter with 7-segment output, Tactile push button 6 mm, Resistor 10 kΩ, Resistor 330 Ω × 7, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the single-digit counter with a display take to build?
About 150 minutes for a beginner maker.
