Push-pull solenoid 12 V
Small plunger solenoid for tapping and latching.
TypeLinear solenoid
Supply voltage12 V
CurrentAbout 1 A
ControlMOSFET with a flyback diode
Motors & ActuatorsReviewedMPN JF-0530BUsed in 2 projects
In short
What is the Push-pull solenoid 12 V and what is it used for?
Small plunger solenoid for tapping and latching. Makers use it for strikers, kicking mechanisms.
How it works
Current pulls the iron plunger into the coil and a spring returns it.
Key specifications
| Motor or actuator spec | Value |
|---|---|
| Type | Linear solenoid |
| Supply voltage | 12 V |
| Current | About 1 A |
| Control | MOSFET with a flyback diode |
Pinout
Two wiresCoil
How to use it
Switch with a logic-level MOSFET and a flyback diode. Use short pulses to keep it from overheating.
Applications
Strikerskicking mechanisms
Builds that use it
Alternatives
- Solenoid lock 12 VLatch version
Common questions
What is the Push-pull solenoid 12 V used for?
In maker projects: strikers, kicking mechanisms.
How does the Push-pull solenoid 12 V work?
Current pulls the iron plunger into the coil and a spring returns it.
What voltage does the Push-pull solenoid 12 V need?
12 V.
What can I use instead of the Push-pull solenoid 12 V?
Solenoid lock 12 V.
