How do you build a conductive dough circuit lab?
Salt-dough made with a lot of salt carries a small current, so you can sculpt a circuit that lights an LED and sounds a buzzer, then measure how the dough's resistance changes with its length and width. Do not eat the dough, wash hands afterwards, and keep it from small children. You need Battery holder 4 × AA with switch, AA alkaline battery × 4, LED 5 mm red, Resistor 220 Ω, Passive buzzer, Digital multimeter, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 60 min
- Parts
- 8
Make a circuit from salty dough.
Parts list
- Power
- Batteries
- Semiconductors
- Passives
- Motors & Actuators
- Tools & Instruments
- Prototyping
- Prototyping
How to build it
- Mix and shape a salt-dough strip
- Join the battery, LED and dough
- Light the LED through the dough
- Measure resistance for different lengths
- Draw a graph of length against resistance
Common questions
What parts do I need for the conductive dough circuit lab?
Battery holder 4 × AA with switch, AA alkaline battery × 4, LED 5 mm red, Resistor 220 Ω, Passive buzzer, Digital multimeter, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the conductive dough circuit lab take to build?
About 60 minutes for a beginner maker.
