How do you build a TPA3116 battery boombox?
A 2 × 50 W TPA3116 amplifier with a Bluetooth receiver runs from a 3S Li-ion pack with a BMS and a charge indicator. You need TPA3116 2 × 50 W amplifier board, Bluetooth audio receiver module (BT5.0), Li-ion 18650 pack 3S 2P (11.1 V), BMS 3S 20 A (11.1 V Li-ion), Lithium battery level indicator (1S to 4S), LM2596 Buck Module, Speaker 4 Ω 3 W × 2, Rocker switch (KCD1, 2-pin) and DC power jack 5.5 x 2.1 mm (panel).
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 9
Size a battery for an amplifier and protect the pack.
Parts list
- Audio
- Audio
- Batteries
- Power
- Power
- Power
- Motors & ActuatorsSpeaker 4 Ω 3 W × 2Use 20 W speakers for full volume
- Switches
- Power
How to build it
- Power the amplifier straight from the 3S pack through the BMS
- Drop to 5 V with the buck module for the Bluetooth board
- Add a level indicator
- Charge with a proper 12.6 V Li-ion charger
- Work out run time from average, not peak, power
Common questions
What parts do I need for the TPA3116 battery boombox?
TPA3116 2 × 50 W amplifier board, Bluetooth audio receiver module (BT5.0), Li-ion 18650 pack 3S 2P (11.1 V), BMS 3S 20 A (11.1 V Li-ion), Lithium battery level indicator (1S to 4S), LM2596 Buck Module, Speaker 4 Ω 3 W × 2, Rocker switch (KCD1, 2-pin) and DC power jack 5.5 x 2.1 mm (panel). Speaker 4 Ω 3 W × 2: Use 20 W speakers for full volume.
How long does the TPA3116 battery boombox take to build?
About 240 minutes for a intermediate maker.
