BMS 3S 20 A (11.1 V Li-ion)
Protection board for three Li-ion cells in series.
Function3S battery protection
Output voltagePack 9 to 12.6 V
Output current20 A
ProtectionOver-charge, over-discharge, short-circuit
PowerReviewedMPN 3S 20A BMSUsed in 4 projects
In short
What is the BMS 3S 20 A (11.1 V Li-ion) and what is it used for?
Protection board for three Li-ion cells in series. Makers use it for 12 V battery packs.
Balancing is not included on every version
How it works
It monitors each cell and cuts the negative path with MOSFETs if any cell goes outside safe limits.
Key specifications
| Power module spec | Value |
|---|---|
| Function | 3S battery protection |
| Output voltage | Pack 9 to 12.6 V |
| Output current | 20 A |
| Protection | Over-charge, over-discharge, short-circuit |
Pinout
B−Pack negative
B1 and B2Balance taps between cells
B+Pack positive
P−Load and charger negative
P+Same as B+ on most boards
How to use it
Connect the balance wires in order from B− upwards, with all cells balanced before first use. Charge the pack with a 12.6 V charger through P+ and P−.
Applications
12 V battery packs
Builds that use it
Alternatives
- BMS 2S 10 A (7.4 V Li-ion)2-cell version
Common questions
What is the BMS 3S 20 A (11.1 V Li-ion) used for?
In maker projects: 12 V battery packs.
How does the BMS 3S 20 A (11.1 V Li-ion) work?
It monitors each cell and cuts the negative path with MOSFETs if any cell goes outside safe limits.
What can I use instead of the BMS 3S 20 A (11.1 V Li-ion)?
BMS 2S 10 A (7.4 V Li-ion).
