Projects / Ideas / Analog signal router

Analog signal router

IntermediateAnalog CircuitsIdeaReviewed
In short

How do you build an analog signal router?

A quad analog switch routes one of two signals to a speaker, picked by a button, so you hear the difference between a tone and a noise. You need CD4066 quad bilateral switch, NE555 Timer IC, Tactile push button 6 mm, Resistor 10 kΩ × 3, Ceramic Capacitor 100 nF × 2, Passive buzzer, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Route analog signals with digital control.

Parts list

How to build it

  1. Build a tone source
  2. Wire one switch section
  3. Control it with the button
  4. Mix in a second source
  5. Compare the sounds

Related projects

Common questions

What parts do I need for the analog signal router?

CD4066 quad bilateral switch, NE555 Timer IC, Tactile push button 6 mm, Resistor 10 kΩ × 3, Ceramic Capacitor 100 nF × 2, Passive buzzer, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

How long does the analog signal router take to build?

About 240 minutes for a intermediate maker.