Idea
In short
How do you build a dark-triggered tone?
A low-power 555 makes a tone from a buzzer only when a light sensor sees darkness. You need TLC555 CMOS timer, LDR Photoresistor, Resistor 10 kΩ, Resistor 100 kΩ, Ceramic Capacitor 100 nF, Passive buzzer, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make a dark-activated tone.
Parts list
- Integrated Circuits
- Sensors
- Passives
- Passives
- Passives
- Motors & Actuators
- Batteries
- Power
- Prototyping
How to build it
- Build the light divider
- Wire the 555 as an oscillator
- Gate it with the sensor
- Set the pitch
- Measure the battery current
Common questions
What parts do I need for the dark-triggered tone?
TLC555 CMOS timer, LDR Photoresistor, Resistor 10 kΩ, Resistor 100 kΩ, Ceramic Capacitor 100 nF, Passive buzzer, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.
How long does the dark-triggered tone take to build?
About 150 minutes for a beginner maker.
