Components / Boards / STM32 Blue Pill (STM32F103C8T6)

STM32 Blue Pill (STM32F103C8T6)

Cheap 72 MHz ARM board. Program it with an ST-Link.

MicrocontrollerSTM32F103C8T6 Cortex-M3
Clock72 MHz
Flash64 KB (often 128 KB)
RAM20 KB
Development BoardsReviewedMPN STM32F103C8T6 boardUsed in 21 projects
STM32
In short

What is the STM32 Blue Pill (STM32F103C8T6) and what is it used for?

Cheap 72 MHz ARM board. Program it with an ST-Link. Makers use it for learning ARM and STM32CubeIDE.

How it works

A 72 MHz STM32F103 Cortex-M3 with 3.3 V I/O (many pins 5 V tolerant), USB, CAN and timers.

Key specifications

Development board specValue
MicrocontrollerSTM32F103C8T6 Cortex-M3
Clock72 MHz
Flash64 KB (often 128 KB)
RAM20 KB
Logic level3.3 V (many pins 5 V tolerant)
I/O pins32 GPIO
ADC12-bit, 10 channels

Pinout

PA9 PA10USART1 TX RX (serial bootloader)
PB6 PB7I2C1 SCL SDA
PA5 PA6 PA7SPI1 SCK MISO MOSI
PA0 to PA7ADC
PC13LED (active low)
SWDIO SWCLKST-Link programming
BOOT0Jumper for serial bootloader

How to use it

Program with an ST-Link over SWD in STM32CubeIDE or the STM32duino core. Many boards carry a CKS32 or other clone chip, which can fail ST-Link's ID check, and many have the wrong USB pull-up resistor (R10), so USB may need a 1.5 kΩ fix.

Applications

Alternatives

Buy at

Common questions

What is the STM32 Blue Pill (STM32F103C8T6) used for?

In maker projects: learning ARM and STM32CubeIDE.

How does the STM32 Blue Pill (STM32F103C8T6) work?

A 72 MHz STM32F103 Cortex-M3 with 3.3 V I/O (many pins 5 V tolerant), USB, CAN and timers.

What can I use instead of the STM32 Blue Pill (STM32F103C8T6)?

STM32 Black Pill (STM32F411CEU6) and STM32 Nucleo-64.