Idea
In short
How do you build a beanbag toss scorer?
Three pads with piezo discs under them sense a thrown beanbag, and a Nano adds up a score on an OLED for a target game, with the hardest pad worth the most. Safe, soft and low voltage. You need Arduino Nano, Piezo vibration sensor (disc) × 3, Resistor 100 kΩ × 3, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 140 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Score a throwing game.
Parts list
- Development Boards
- Sensors
- PassivesResistor 100 kΩ × 3
- Displays
- Prototyping
How to build it
- Fix a piezo disc under each pad
- Wire a resistor across each disc
- Read the three analog inputs
- Detect a hit above a level
- Add up and show the score
Common questions
What parts do I need for the beanbag toss scorer?
Arduino Nano, Piezo vibration sensor (disc) × 3, Resistor 100 kΩ × 3, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the beanbag toss scorer take to build?
About 140 minutes for a beginner maker.
