Components / Sensors / Piezo vibration sensor (disc)

Piezo vibration sensor (disc)

Piezo disc that makes a voltage when bent or tapped.

MeasuresVibration and tap
InterfaceAnalog pulse (add a 1 MΩ resistor in parallel)
Watch out forCan produce high voltage spikes: add a resistor and clamp
SensorsReviewedMPN Piezo disc 27mmUsed in 3 projects
In short

What is the Piezo vibration sensor (disc) and what is it used for?

Piezo disc that makes a voltage when bent or tapped. Makers use it for drum pads, knock detection.

How it works

A piezoelectric ceramic produces a voltage when it is bent or struck.

Key specifications

Sensor specValue
MeasuresVibration and tap
InterfaceAnalog pulse (add a 1 MΩ resistor in parallel)
Watch out forCan produce high voltage spikes: add a resistor and clamp

Pinout

RedPiezo element (inner disc)
BlackBrass disc

How to use it

Put a 1 MΩ resistor across the leads, and a Zener or the ADC's protection plus a 1 kΩ series resistor, because sharp taps can produce tens of volts. Read the peaks with analogRead for knock detection.

Applications

Alternatives

Buy at

Common questions

What is the Piezo vibration sensor (disc) used for?

In maker projects: drum pads, knock detection.

How does the Piezo vibration sensor (disc) work?

A piezoelectric ceramic produces a voltage when it is bent or struck.

How do I connect the Piezo vibration sensor (disc) to an Arduino or ESP32?

Analog pulse (add a 1 MΩ resistor in parallel). Pins: Red (Piezo element (inner disc)), Black (Brass disc).

What can I use instead of the Piezo vibration sensor (disc)?

Knock sensor module (KY-031).