Idea
In short
How do you build a table football goal counter?
An infrared beam across each goal counts when the ball breaks it, and the score shows on a display. You need Arduino Nano, IR LED 940 nm (5 mm) × 2, Photodiode / IR receiver diode (5 mm black) × 2, Resistor 330 Ω × 2, Resistor 10 kΩ × 2, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count goals with a break beam.
Parts list
- Development Boards
- Optoelectronics
- Optoelectronics
- PassivesResistor 330 Ω × 2
- PassivesResistor 10 kΩ × 2
- Displays
- Switches
- Prototyping
How to build it
- Aim an infrared LED at each receiver
- Read the receiver level
- Detect a break with a short debounce
- Count goals for each side
- Add a reset button
Related projects
Common questions
What parts do I need for the table football goal counter?
Arduino Nano, IR LED 940 nm (5 mm) × 2, Photodiode / IR receiver diode (5 mm black) × 2, Resistor 330 Ω × 2, Resistor 10 kΩ × 2, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the table football goal counter take to build?
About 150 minutes for a beginner maker.
