Idea
In short
How do you build a medium transistor lamp driver?
A medium-power transistor switches a small 12 V lamp from a board pin. Learn about base current and the saturation voltage drop. You need Arduino Nano, BD139 NPN transistor, Resistor 1 kΩ, 12 V 2 A DC adapter, LED 5 mm white × 4, Resistor 1 kΩ × 4 and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 180 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Switch a bigger load with a transistor.
Parts list
- Development Boards
- Semiconductors
- Passives
- Power
- OptoelectronicsLED 5 mm white × 4
- PassivesResistor 1 kΩ × 4
- Prototyping
How to build it
- Work out the base resistor
- Wire the load
- Switch from a pin
- Measure the drop across the transistor
- Feel for heat
Common questions
What parts do I need for the medium transistor lamp driver?
Arduino Nano, BD139 NPN transistor, Resistor 1 kΩ, 12 V 2 A DC adapter, LED 5 mm white × 4, Resistor 1 kΩ × 4 and Breadboard 830 Tie Points.
How long does the medium transistor lamp driver take to build?
About 180 minutes for a beginner maker.
