Projects / Ideas / Two-transistor flasher

Two-transistor flasher

BeginnerLearningIdeaReviewed
In short

How do you build a two-transistor flasher?

Two transistors cross-coupled with capacitors make an LED flasher with no chip, the classic multivibrator. You need BC547 NPN transistor × 2, Electrolytic capacitor 10 µF × 2, Resistor 10 kΩ × 2, Resistor 330 Ω × 2, LED 5 mm red, LED 5 mm green, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a multivibrator.

Parts list

How to build it

  1. Wire the two transistors
  2. Add the timing capacitors
  3. Watch the LEDs swap
  4. Change the speed
  5. Measure the period

Related projects

Common questions

What parts do I need for the two-transistor flasher?

BC547 NPN transistor × 2, Electrolytic capacitor 10 µF × 2, Resistor 10 kΩ × 2, Resistor 330 Ω × 2, LED 5 mm red, LED 5 mm green, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

How long does the two-transistor flasher take to build?

About 150 minutes for a beginner maker.