Projects / Ideas / LED sound level bar

LED sound level bar

BeginnerAudio & MusicIdeaReviewed
In short

How do you build an LED sound level bar?

A microphone amplifier and a bar-graph driver light more LEDs as the room gets louder. You need MAX9814 microphone with AGC, LM3914 bar graph driver, LED 5 mm red × 10, Resistor 1 kΩ, Electrolytic capacitor 10 µF and Breadboard 830 Tie Points.

Level
Beginner
Time
About 180 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Turn sound level into a bar.

How to build it

  1. Wire the microphone
  2. Rectify the signal
  3. Smooth it
  4. Drive the bar graph
  5. Calibrate the top LED

Related projects

Common questions

What parts do I need for the LED sound level bar?

MAX9814 microphone with AGC, LM3914 bar graph driver, LED 5 mm red × 10, Resistor 1 kΩ, Electrolytic capacitor 10 µF and Breadboard 830 Tie Points.

How long does the LED sound level bar take to build?

About 180 minutes for a beginner maker.