Idea
In short
How do you build an analog VU meter ladder?
An op-amp rectifier and a ladder of comparators light more LEDs as the sound gets louder. You need LM324 quad op-amp, LM339 quad comparator, Signal Diode 1N4148 × 2, Resistor 10 kΩ × 6, LED 5 mm red × 5, Resistor 220 Ω × 5, Electrolytic capacitor 10 µF and Breadboard 830 Tie Points × 2.
- Level
- Intermediate
- Time
- About 330 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a level meter without code.
Parts list
- Integrated Circuits
- Integrated Circuits
- Semiconductors
- PassivesResistor 10 kΩ × 6
- SemiconductorsLED 5 mm red × 5
- PassivesResistor 220 Ω × 5
- Passives
- Prototyping
How to build it
- Amplify the microphone
- Rectify with the diode pair
- Smooth with a capacitor
- Set the comparator thresholds
- Light the LEDs
Common questions
What parts do I need for the analog VU meter ladder?
LM324 quad op-amp, LM339 quad comparator, Signal Diode 1N4148 × 2, Resistor 10 kΩ × 6, LED 5 mm red × 5, Resistor 220 Ω × 5, Electrolytic capacitor 10 µF and Breadboard 830 Tie Points × 2.
How long does the analog VU meter ladder take to build?
About 330 minutes for a intermediate maker.
