Idea
In short
How do you build a tiny PIR hallway light?
A small motion sensor turns on a soft light for a short time when someone walks by, saving power. You need Arduino Nano, AM312 mini PIR motion sensor, MOSFET IRLZ44N, 12 V LED strip warm white (5 m, 2835), 12 V 2 A DC adapter, Resistor 10 kΩ and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 180 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Turn on a light with motion.
Parts list
- Development Boards
- Sensors
- Semiconductors
- Optoelectronics
- Power
- Passives
- Prototyping
How to build it
- Wire the sensor
- Wire the MOSFET lamp driver
- Light on motion
- Hold for twenty seconds
- Dim only when it is dark
Common questions
What parts do I need for the tiny PIR hallway light?
Arduino Nano, AM312 mini PIR motion sensor, MOSFET IRLZ44N, 12 V LED strip warm white (5 m, 2835), 12 V 2 A DC adapter, Resistor 10 kΩ and Breadboard 830 Tie Points.
How long does the tiny PIR hallway light take to build?
About 180 minutes for a beginner maker.
