Idea
In short
How do you build a remote control for a relay board?
A 4-channel 433 MHz remote and receiver switch four relays for lights or fans on a bench. You need 433 MHz 4-channel remote and receiver, Relay module 4-channel 5 V, 5 V 2 A USB adapter, LED 5 mm green × 4 and Resistor 330 Ω × 4.
- Level
- Beginner
- Time
- About 60 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a ready remote and receiver module.
Parts list
- Wireless
- Interfaces
- Power
- SemiconductorsLED 5 mm green × 4
- PassivesResistor 330 Ω × 4
How to build it
- Pair the remote with the receiver
- Choose momentary or latching mode
- Wire the receiver outputs to the relays
- Add LEDs showing each channel
- Keep mains wiring to a qualified electrician
Common questions
What parts do I need for the remote control for a relay board?
433 MHz 4-channel remote and receiver, Relay module 4-channel 5 V, 5 V 2 A USB adapter, LED 5 mm green × 4 and Resistor 330 Ω × 4.
How long does the remote control for a relay board take to build?
About 60 minutes for a beginner maker.
