433 MHz 4-channel remote and receiver
Key-fob remote with a decoder board that has four outputs.
What is the 433 MHz 4-channel remote and receiver and what is it used for?
Key-fob remote with a decoder board that has four outputs. Makers use it for wireless relay control.
The remote sends a coded 433 MHz ASK signal, and the decoder on the receiver raises the matching output.
Key specifications
| Wireless module spec | Value |
|---|---|
| Radio | 433 MHz ASK with fixed or learning code |
| Typical range | About 30 to 50 m |
| Interface | 4 digital outputs |
| Supply voltage | 5 V receiver |
Pinout
How to use it
Read D0 to D3 as digital inputs. Check whether the receiver is momentary, latching or toggle. Learning-code (EV1527) receivers pair by pressing their learn button and then the remote.
Applications
Builds that use it
Alternatives
- 433 MHz RF transmitter and receiver pairRaw link for your own protocol
- IR receiver VS1838BInfrared, line of sight
Common questions
What is the 433 MHz 4-channel remote and receiver used for?
In maker projects: wireless relay control.
How does the 433 MHz 4-channel remote and receiver work?
The remote sends a coded 433 MHz ASK signal, and the decoder on the receiver raises the matching output.
What voltage does the 433 MHz 4-channel remote and receiver need?
5 V receiver.
How do I connect the 433 MHz 4-channel remote and receiver to an Arduino or ESP32?
4 digital outputs. Pins: VT (High while any button is received), D0 D1 D2 D3 (Outputs for buttons A to D), 5V (Supply), GND (Ground).
What can I use instead of the 433 MHz 4-channel remote and receiver?
433 MHz RF transmitter and receiver pair and IR receiver VS1838B.
