Idea
In short
How do you build a remote for three lamps?
Three buttons on a spare TV remote switch three LEDs, which could later become relays driven by a qualified electrician for real lamps. You need Arduino Nano, IR receiver VS1838B, LED 5 mm red, LED 5 mm green, LED 5 mm yellow, Resistor 220 Ω × 3 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control outputs with an IR remote.
Parts list
- Development Boards
- Sensors
- Semiconductors
- Semiconductors
- Semiconductors
- PassivesResistor 220 Ω × 3
- Prototyping
How to build it
- Learn the three codes
- Store them
- Toggle an LED per button
- Add a beep on each press
- Save states
Common questions
What parts do I need for the remote for three lamps?
Arduino Nano, IR receiver VS1838B, LED 5 mm red, LED 5 mm green, LED 5 mm yellow, Resistor 220 Ω × 3 and Breadboard 830 Tie Points.
How long does the remote for three lamps take to build?
About 210 minutes for a intermediate maker.
