Lab / Virtual lab / Diodes and power supplies

Zener voltage regulator

Show that the output stays near the zener voltage as the input rises, and measure the line regulation.

Diodes and power suppliesSimulatedFull experiment write-up →

Circuit

Updates as you change values
3 VRS 470 Ω5.1 VRL1 kΩV

A 5.1 V zener with a 470 Ω series resistor and a load; vary the input and read the output.

Controls

Changing any setting except input voltage starts a new set of readings.

Meters

Output2.04 V
Zener current0 mA

Graph

0 readings

Your graph appears here

Take readings, or press Auto sweep to log a full set.

your readings

Theory

  • Below breakdown: VO = Vin RL / (RS + RL)
  • Regulates once Vin > VZ (RS + RL) / RL
  • IS = (Vin − VZ) / RS, IL = VZ / RL, IZ = IS − IL
  • Line regulation ΔVO / ΔVin ≈ rZ / RS (rZ ≈ 10 Ω here)
  • Zener power PZ = VZ × IZ must stay under the rating (500 mW for a BZX55)

Worked out for your values

Regulation starts at Vin
7.497 V
Load current IL
5.1 mA
Series current IS
0 A
Zener current IZ (approx.)
0 A
Zener power
0 W

Your result

Worked out from your readings and compared with theory.

Output in regulation (average)

Take readings above 7.5 V.

Line regulation ΔVO/ΔVin

Take two or more readings above 8.0 V.

Sources of error

  • Zener voltage tolerance (±5 % for BZX55)
  • VZ rises with temperature as the zener warms up
  • Zener resistance rZ is larger at low current