Lab / Virtual lab / Diodes and power supplies

LED V-I characteristic

Plot the forward characteristic of red, green and blue LEDs and compare their turn-on voltages.

Diodes and power suppliesSimulated

Circuit

Updates as you change values
1 VR 330 ΩARedV

A variable supply, a 330 Ω series resistor and one LED in forward bias; read the LED voltage and current.

Controls

Changing any setting except supply voltage starts a new set of readings.

Meters

LED voltage1 V
LED current2.76e-7 mA

Graph

0 readings

Your graph appears here

Take readings, or press Auto sweep to log a full set.

your readings

Theory

  • Same diode law: ID = IS (e^(VD / nVT) − 1), with a much smaller IS
  • Wider band gap → higher turn-on voltage and shorter wavelength
  • Photon energy E = h c / λ ≈ 1240 / λ(nm) eV
  • Series resistor R = (VS − VF) / IF

Worked out for your values

VF at 1 mA (theory)
1.781 V
Photon energy
1.98 eV
Resistor for 10 mA from 5 V
311.9 Ω
Current now
276.5 pA

Your result

Worked out from your readings and compared with theory.

VF at 1 mA

Take readings either side of 1 mA.

Sources of error

  • LEDs of the same colour vary from batch to batch
  • Self-heating shifts VF at high current
  • Don't exceed about 20 mA on a 5 mm LED