Lab / Virtual lab / Diodes and power supplies
PN junction diode V-I
Plot the forward characteristic of a silicon diode and find its cut-in voltage and dynamic resistance.
Circuit
Updates as you change valuesA variable supply, a 1 kΩ series resistor and a 1N4007 in forward bias; read the diode voltage and current.
Controls
Meters
Diode voltage0.6 V
Diode current0.4 mA
Graph
0 readingsYour graph appears here
Take readings, or press Auto sweep to log a full set.
your readings
Theory
- Shockley: ID = IS (e^(VD / nVT) − 1)
- VT = kT / q ≈ 25.85 mV at 27 °C; n ≈ 1.9 for a 1N4007
- Dynamic resistance rd = n VT / ID (about 49 Ω at 1 mA)
- Static resistance RD = VD / ID
- VD falls about 2 mV per °C at fixed current
Worked out for your values
- Diode voltage
- 599.6 mV
- Diode current
- 400.4 µA
- Dynamic rd = nVT/ID
- 122.7 Ω
- Static RD = VD/ID
- 1.497 kΩ
- VD at 1 mA (theory)
- 644.5 mV
Your result
Worked out from your readings and compared with theory.
VD at 1 mA (cut-in)
Take readings either side of 1 mA.
Ideality factor n (slope of ln ID against VD)
Take two or more readings above 0.1 mA.
rd at 1 mA = n VT / 1 mA
Take two or more readings above 0.1 mA.
Sources of error
- Junction heating at high current lowers VD
- Ammeter burden voltage in series
- Bulk (ohmic) resistance of the diode at high current
More in Diodes and power supplies
