Lab / Virtual lab / Op-amps, timers and oscillators
R-2R ladder DAC
Step through the digital codes of an R-2R ladder DAC and measure its step size and full-scale output.
Circuit
Updates as you change valuesAn R-2R ladder (R = 10 kΩ) switched by the input bits, followed by an op-amp buffer; read the output with a DMM.
Controls
Changing any setting except digital input starts a new set of readings.
Meters
Output1.56 V
Graph
0 readingsYour graph appears here
Take readings, or press Auto sweep to log a full set.
your readings
Theory
- VO = Vref × D / 2ⁿ
- One step (1 LSB) = Vref / 2ⁿ
- Full scale = Vref (2ⁿ − 1) / 2ⁿ
- Only two resistor values (R and 2R) for any number of bits
- Resistor mismatch shows up as uneven steps (differential non-linearity)
Worked out for your values
- 1 LSB
- 312.5 mV
- Full scale
- 4.688 V
- Code in binary
- 0101
- Output now
- 1.563 V
- Resolution
- 6.25 % of Vref
Your result
Worked out from your readings and compared with theory.
Step size (slope)
Take two or more readings at different codes.
Offset at code 0
Take two or more readings at different codes.
Sources of error
- Resistor mismatch (use 1 % or better parts)
- Switch on-resistance adds to the 2R legs
- Op-amp offset voltage at code 0
More in Op-amps, timers and oscillators
