Lab / Virtual lab / DC circuits

Kirchhoff's current and voltage laws

Check that the currents at a node add up to zero and the voltages round a loop add up to the supply.

DC circuitsSimulated

Circuit

Updates as you change values
5 VR1 1 kΩAR22.2 kΩR34.7 kΩ

A supply feeds R1 in series with R2 and R3 in parallel; read the three branch currents and the voltages across R1 and across the pair.

Controls

Changing any setting except supply voltage starts a new set of readings.

Meters

I1 (into node)2 mA
I2 (R2)1.36 mA
I3 (R3)0.638 mA
V across R12 V
V across R2 ∥ R33 V

Graph

0 readings

Your graph appears here

Take readings, or press Auto sweep to log a full set.

your readings

Theory

  • KCL: the currents into a node add to zero, so I1 = I2 + I3
  • KVL: the voltages round a loop add to zero, so VS = V1 + VP
  • R2 ∥ R3 = R2 R3 / (R2 + R3)
  • Total current I1 = VS / (R1 + R2 ∥ R3)
  • Current divider: I2 = I1 R3 / (R2 + R3)

Worked out for your values

R2 ∥ R3
1.499 kΩ
Total resistance
2.499 kΩ
Total current I1
2.001 mA
I2
1.363 mA
I3
638.1 µA

Your result

Worked out from your readings and compared with theory.

KCL: slope of I1 against I2 + I3 (should be 1)

Take two or more readings.

KVL: slope of (V1 + VP) against VS (should be 1)

Take two or more readings.

Total resistance R1 + R2 ∥ R3 (VS / I1)

Take two or more readings.

Sources of error

  • Meter burden: a current meter adds a little series resistance
  • Resistor tolerance (5 %) shifts the branch currents but not KCL or KVL
  • A reading rounded to 3 digits leaves a small mismatch in the sums