Lab / Virtual lab / Transistors
JFET transfer characteristic
Plot ID against VGS for an n-channel JFET and find IDSS, the pinch-off voltage and gm.
Circuit
Updates as you change valuesAn n-channel JFET with VDS held at 10 V; a negative gate supply sets VGS; read the drain current.
Controls
Changing jfet sample keeps them, so you can compare curves.
Meters
ID5.63 mA
Graph
0 readingsYour graph appears here
Take readings, or press Auto sweep to log a full set.
your readings other jfet sample
Theory
- Shockley: ID = IDSS (1 − VGS / VP)²
- ID = 0 for VGS ≤ VP (pinch-off)
- gm = gm0 (1 − VGS / VP), gm0 = 2 IDSS / |VP|
- The gate junction is reverse biased, so IG is only nanoamps: very high input resistance
- √ID against VGS is a straight line: its x-intercept is VP
Worked out for your values
- IDSS
- 10 mA
- VP
- -4 V
- ID now
- 5.625 mA
- gm0
- 5 mA/V
- gm now
- 3.75 mA/V
Your result
Worked out from your readings and compared with theory.
IDSS (√ID line at VGS = 0)
Take two or more readings with ID above 0.05 mA.
VP (x-intercept of √ID line)
Take two or more readings with ID above 0.05 mA.
gm0 = 2 IDSS / |VP|
Take two or more readings with ID above 0.05 mA.
Sources of error
- IDSS and VP spread widely between JFETs of the same type
- Drain current heats the channel and lowers ID
- Small VGS steps are hard to set near pinch-off
