Lab / Virtual lab / Transistors

BJT common-emitter output characteristics

Plot IC against VCE for several base currents, and find β and the output resistance.

TransistorsSimulatedFull experiment write-up →

Circuit

Updates as you change values
A2 VIB 20 µA

An NPN (BC547-type) in common emitter: a base current source and a variable collector supply; read VCE and IC.

Controls

Changing base current keeps them, so you can compare curves.

Meters

IC3.06 mA

Graph

0 readings

Your graph appears here

Take readings, or press Auto sweep to log a full set.

your readings other base current

Theory

  • Active region: IC = β IB (1 + VCE / VA), VA = Early voltage
  • Saturation below VCE ≈ 0.2 V, where IC falls quickly
  • Output resistance ro = ΔVCE / ΔIC ≈ VA / IC
  • α = β / (β + 1); IE = IC + IB

Worked out for your values

β (this model)
150
α
0.9934
IC now (active)
3.06 mA
ro = VA / IC
33.33 kΩ
Early voltage VA
100 V

Your result

Worked out from your readings and compared with theory.

β at IB = 20 µA (line at VCE = 0)

Take two or more readings above VCE = 1 V on this curve.

Output resistance ro

Take two or more readings above VCE = 1 V on this curve.

Sources of error

  • The transistor heats up at high VCE × IC, which raises β
  • β differs between parts of the same type
  • Base current drifts as VBE changes with temperature