Lab / Virtual lab / Transistors
Transistor as a switch
Show the transistor in cut-off, active and saturation as the base current rises.
Circuit
Updates as you change valuesAn NPN transistor with a 9 V supply and a collector resistor; the base current comes from a variable source.
Controls
Changing any setting except base current starts a new set of readings.
Meters
Collector current3 mA
VCE6 V
Graph
0 readingsYour graph appears here
Take readings, or press Auto sweep to log a full set.
your readings
Theory
- Active region: IC = β IB
- Saturation: IC(sat) ≈ (VCC − VCE(sat)) / RC, VCE(sat) ≈ 0.2 V
- Edge of saturation at IB = IC(sat) / β
- Drive 2–5 × that base current (overdrive) so the switch stays saturated for any β
- Power in the transistor P = VCE × IC: small when fully on or fully off
Worked out for your values
- Region
- Active
- IC(sat)
- 8.8 mA
- IB at edge of saturation
- 58.67 µA
- Collector current
- 3 mA
- Power in transistor
- 18 mW
Your result
Worked out from your readings and compared with theory.
β from the active region
Take two or more readings before saturation.
IC(sat)
Raise the base current past 59 µA.
Sources of error
- β varies widely between transistors and with temperature
- VCE(sat) depends on how hard the base is driven
- Base current source is not perfectly steady
