JFET drain and transfer characteristics
To plot the drain and transfer characteristics of an N-channel JFET and find IDSS, pinch-off voltage and transconductance.
Theory
A JFET is a voltage-controlled device. With VGS = 0 the drain current saturates at IDSS above the pinch-off voltage. Making the gate more negative narrows the channel: ID = IDSS (1 − VGS/VP)². Transconductance gm = ΔID/ΔVGS, and the drain resistance rd = ΔVDS/ΔID.
Apparatus
- JFET BFW10 (or 2N5457)
- Two DC supplies
- Voltmeters
- Milliammeter
Circuit connections
- VDD → mA meter → drain; source to ground; VGG (negative) → gate; voltmeters across gate-source and drain-source
Procedure
Pre-lab check
4 questions · 75% to be readyTry the readings before the lab
| VDS (V) | ID at VGS 0 V (mA) | ID at VGS −1 V (mA) | ID at VGS −2 V (mA) |
|---|---|---|---|
| 0 | 0 | 0 | 0 |
| 0.5 | 1.875 | 1.375 | 0.875 |
| 1 | 3.5 | 2.5 | 1.5 |
| 2 | 6 | 4 | 2.02 |
| 3 | 7.5 | 4.568 | 2.03 |
| 4 | 8.16 | 4.59 | 2.04 |
| 6 | 8.24 | 4.635 | 2.06 |
| 8 | 8.32 | 4.68 | 2.08 |
| 10 | 8.4 | 4.725 | 2.1 |
Precautions
- Never forward-bias the gate-source junction.
- Handle the FET by its body, not its leads.
My readings
Type what you measured. It goes into your record book, and to My Garage when you are signed in.
| S. No. | VDS (V) | ID at VGS 0 V (mA) | ID at VGS −1 V (mA) | ID at VGS −2 V (mA) |
|---|---|---|---|---|
| 1 | ||||
| 2 | ||||
| 3 | ||||
| 4 | ||||
| 5 | ||||
| 6 |
Check my readings
Put the value you set in the first column, then compare. Real parts have tolerance.
Your lab record
Everything above is free. The print-ready write-up comes with Maker.
Printed pages leave the observation table empty for your own readings.
Viva practice
Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.
Quick answers for your record and viva
What is the aim of the jfet drain and transfer characteristics experiment?
To plot the drain and transfer characteristics of an N-channel JFET and find IDSS, pinch-off voltage and transconductance.
What apparatus is needed for jfet drain and transfer characteristics?
JFET BFW10 (or 2N5457), Two DC supplies, Voltmeters, Milliammeter.
What is the theory behind jfet drain and transfer characteristics?
A JFET is a voltage-controlled device. With VGS = 0 the drain current saturates at IDSS above the pinch-off voltage. Making the gate more negative narrows the channel: ID = IDSS (1 − VGS/VP)². Transconductance gm = ΔID/ΔVGS, and the drain resistance rd = ΔVDS/ΔID.
What result should I get in jfet drain and transfer characteristics?
IDSS = ___ mA, VP = ___ V, gm = ___ mS, rd = ___ kΩ.
What precautions should I take in jfet drain and transfer characteristics?
Never forward-bias the gate-source junction. Handle the FET by its body, not its leads.
