Lab / KTU / Circuits and measurements / Experiment 4

Verification of Thevenin's and Norton's theorems

Circuits and measurementsVirtual readings4 viva questionsRecord book ready
Open virtual bench
Aim

To find the Thevenin and Norton equivalents of a network and verify that they give the same load current.

Apparatus
  • DC supply
  • Resistors (R1 1 kΩ, R2 2.2 kΩ, R3 470 Ω)
  • Decade resistance box as the load
  • Multimeter
Vout = 2.5 V

Theory

Any linear two-terminal network can be replaced by a voltage source Vth in series with Rth (Thevenin), or a current source IN = Vth / Rth in parallel with Rth (Norton). Vth is the open-circuit voltage at the terminals; Rth is the resistance seen with sources replaced by their internal resistance. For this network: Vth = V·R2/(R1+R2) and Rth = R1‖R2 + R3.

Read the lesson: Resistor networks ›
Circuit connections
  • Supply → R1 → node A; R2 from A to ground; A → R3 → load terminals; load RL across the terminals

Procedure

Pre-lab check

4 questions · 75% to be ready
1How do you find Rth when the network has a voltage source?
2How are Thevenin and Norton related?
3Do these theorems work for non-linear parts?
4Why is Thevenin's theorem useful?

Try the readings before the lab

Calculated, not measured. In the lab, write down your own readings.
Vth6.875 V
Rth1157.5 Ω
IN = Vth / Rth5.94 mA
01.482.954.435.91001.3k2.4k3.5k4.7kRL (Ω)IL (mA)
IL original (mA)IL Thevenin (mA)
RL (Ω)IL original (mA)IL Thevenin (mA)VL (V)
1005.4675.4670.55
4704.2244.2241.99
10003.1873.1873.19
22002.0482.0484.5
47001.1741.1745.52

Precautions

  • Remove the supply before measuring Rth; never measure resistance in a live circuit.
  • Use the same RL for both measurements.

My readings

Type what you measured. It goes into your record book, and to My Garage when you are signed in.

S. No.RL (Ω)IL original (mA)IL Thevenin (mA)VL (V)
1
2
3
4
5
6

Check my readings

Put the value you set in the first column, then compare. Real parts have tolerance.

Open my record book
Result

Vth = ___ V, Rth = ___ Ω, IN = ___ mA. The load current from the equivalent circuit equals the original, so both theorems are verified.

Everything above is free. The print-ready write-up comes with Maker.

Printed pages leave the observation table empty for your own readings.

Viva questions

Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.

1. How do you find Rth when the network has a voltage source?
2. How are Thevenin and Norton related?
3. Do these theorems work for non-linear parts?
4. Why is Thevenin's theorem useful?

Quick answers for your record and viva

What is the aim of the verification of thevenin's and norton's theorems experiment?

To find the Thevenin and Norton equivalents of a network and verify that they give the same load current.

What apparatus is needed for verification of thevenin's and norton's theorems?

DC supply, Resistors (R1 1 kΩ, R2 2.2 kΩ, R3 470 Ω), Decade resistance box as the load, Multimeter.

What is the theory behind verification of thevenin's and norton's theorems?

Any linear two-terminal network can be replaced by a voltage source Vth in series with Rth (Thevenin), or a current source IN = Vth / Rth in parallel with Rth (Norton). Vth is the open-circuit voltage at the terminals; Rth is the resistance seen with sources replaced by their internal resistance. For this network: Vth = V·R2/(R1+R2) and Rth = R1‖R2 + R3.

What result should I get in verification of thevenin's and norton's theorems?

Vth = ___ V, Rth = ___ Ω, IN = ___ mA. The load current from the equivalent circuit equals the original, so both theorems are verified.

What precautions should I take in verification of thevenin's and norton's theorems?

Remove the supply before measuring Rth; never measure resistance in a live circuit. Use the same RL for both measurements.

Verification of Thevenin's and Norton's theorems